2.10.3. Interrupt controller

The interrupt controller is an implementation of the reference interrupt controller (see Interrupt controller).

The configuration of the interrupt controller model is controlled by a section in peripherals.ami. It has the following items:

{ Default_Intctrl=Intctrl
Range:Base=0x0a000000
WAITS=0
}

Range:Base specifies the area in memory into which the interrupt controller registers are mapped. For details of the interrupt controller registers, see Interrupt controller.

WAITS specifies the number of wait states that accessing the interrupt controller imposes on the processor. The maximum is 30.

Copyright © 1999-2001 ARM Limited. All rights reserved.ARM DUI0058D
Non-Confidential