7.6.2. Synchronizing actions

To synchronize the processors for specific actions:

  1. Select Synchronization Control... from the Target menu to display the Synchronization Control window. Figure 7.3 shows an example.

    Figure 7.3. Synchronization Control window

    Synchronization Control window

  2. Select the Sync check box associated with each processor that you want to include in the processor group.

  3. Deselect the check box associated with each action that you do not want to be synchronized. The actions have the following meanings:

    Load Image

    A specified image is loaded onto all synchronized processors.

    Unload Image

    The image on each synchronized processor is unloaded.

    Reload Image

    The image on each synchronized processor is reloaded.

    Restart

    The PC is reset to the image entry point for all synchronized processors.

    Reset

    All synchronized processors are reset.

    Set PC

    The PC is set to a single value on all synchronized processors.

    Load Binary

    A specified binary is loaded onto all synchronized processors.

Figure 7.4 shows an example Synchronization Control window with a processor group containing the synchronized processors ARM966E-S_0, ARM966E-S_1, and ARM966E-S_2.

Figure 7.4. Synchronization Control window showing synchronized actions

Synchronization Control window showing synchronized actions

See also

Copyright © 2002-2009 ARM Limited. All rights reserved.ARM DUI 0153K
Non-Confidential