3.15. Connecting to all targets for a specific Debug Configuration

If you have a multiprocessor development platform, then you can connect to all configured targets for a selected Debug Configuration in a single operation.

Note

You must select the Configuration grouping to use this feature.

To connect to all targets for a specific Debug Configuration:

  1. Select Connect to Target... from the Target menu to display the Connect to Target window. Figure 3.1 shows an example.

  2. Select Configuration from the Grouped by list.

  3. Expand the required Debug Interface to list the associated Debug Configurations.

  4. Expand the required Debug Configuration to list the associated targets.

    Note

    If the Debug Configuration is not correctly configured, then RealView Debugger displays a Target Connection Error dialog box.

  5. Right-click on the required Debug Configuration name to display the context menu.

  6. Select Connect from the context menu. RealView Debugger connects to all the targets in the chosen Debug Configuration.

See also:

Copyright © 2002-2009 ARM Limited. All rights reserved.ARM DUI 0153K
Non-Confidential