9.6.1. Assigning board/chip definitions to a Debug Configuration

To assign a board/chip definition to a Debug Configuration:

  1. Disconnect all connections that are currently established on the specific Debug Configuration.

  2. In the Connect to Target window, right-click on the Debug Configuration that you want to customize.

  3. Select Properties... from the context menu. The Connection Properties dialog box is displayed.

    Note

    In the remaining steps of this procedure you are going to assign the CP and CM966ES board definitions to demonstrate how to assign board/chip definitions to a connection.

  4. Click the BCD files tab to display the available definitions and assignments.

  5. To assign board/chip definitions to this configuration:

    1. Select the CP definition in the Available Definitions list.

    2. Click the Add button.

      The CP definiton is moved from the Available Definitions list to the Assigned Definitions list.

    3. Repeat these steps to assign the CM966ES definition.

  6. Click OK to save your changes.

  7. Connect to the target.

    This has the effect described in Views that are affected by assigning BCD files.

Copyright © 2002-2009 ARM Limited. All rights reserved.ARM DUI 0153K
Non-Confidential