| |||
Home > Controlling the Behavior of Breakpoints > Setting breakpoints that test for hardware input triggers > Setting a hardware input trigger test |
To set a hardware input trigger test for a breakpoint:
Open the Create Breakpoint or Edit Breakpoint dialog box as appropriate.
Click More... on the breakpoint dialog box you are using. The breakpoint behavior controls are displayed. Figure 12.9 shows an example.
In the Hardware Support group, select the required input trigger test from the Hardware Support list. The tests available depend on your debug target.
Click Edit in the Hardware Support group:
where a test has a predefined list of options, a Select Hardware Support Value dialog box is displayed, showing the values that you can assign to the selected test
where a test requires that you enter a value, a prompt dialog box is displayed, so that you can enter the required value.
Specify the value for the test in the dialog box.
Click OK to close the dialog box. The test in the Hardware Support list is updated with the value you specified.
Click OK to set the breakpoint and close the breakpoint dialog box.