4.9. Unloading an image

You might want to unload an image for various reasons. For example, if you have rebuilt the image after it was loaded, and you want to clear any debugging features that might not be relevant to the new image, such as breakpoints.

To unload an image:

  1. Select Process Control from the View menu to display the Process Control view, if it is not already visible.

  2. Deselect the Load check box.

    The debug information is removed from RealView Debugger.

Alternatively, select Unload Image from the Target menu. If more than one image is loaded on the target, an Unload Image dialog box is displayed. Figure 4.8 shows an example. Select one or more images to unload, then click OK.

Figure 4.8. Unload Image dialog box

Unload Image dialog box

See also:

Copyright © 2002-2009 ARM Limited. All rights reserved.ARM DUI 0153K
Non-Confidential