3.7.2. Making a connection from the Home Page

The Home Page lists the last 10 connections you have made. If those connections are still valid, then you can connect to them without having to open the Connect to Target window:

  1. Select Home Page from the View menu to display the Home Page in the Code window. Figure 3.10 shows an example. The Recent Connections are listed at the bottom of the page.

    Note

    The Recent Images list is displayed only if you have previously loaded an image.

    Figure 3.10. Home Page

    Home Page

  2. If any connections are listed, click the required connection to connect to the related target. The connection entry changes to black text to show that this connection is established, and the hyperlink is removed until you disconnect.

  3. If no connections are listed:

    1. Click the blue Connect to Target... hyperlink. The Connect to Target window is displayed.

    2. Connect to a target using the Connect to Target window.

See also

Copyright © 2002-2009 ARM Limited. All rights reserved.ARM DUI 0153K
Non-Confidential