3.2.4. Creating an ISSM Debug Configuration

To create an ISSM Debug Configuration:

  1. Select Connect to Target... from the Target menu to display the Connect to Target window.

  2. Select Configuration from the Grouped By drop-down list.

  3. Click Add for the Instruction Set System Model (ISSM) Debug Interface. The Model Configuration Utility dialog box is displayed. Figure 3.4 shows an example.

    Figure 3.4. Model Configuration Utility dialog box (ISSM)

    Model Configuration Utility dialog box (ISSM)

  4. The ISSMs provided with RVDS are listed by default. If you want to locate other ISSMs:

    1. Click Browse... to display the Browse for Folder dialog box.

    2. Locate the directory containing your models.

    3. Click OK.

      The models are listed in the Models pane.

  5. Select the required model in the Models pane.

  6. Configure the settings as required for each device in the ISSM model in the Parameters of 'device_name' pane.

  7. Click OK to save your changes and close the dialog box. The Model Configuration Utility dialog box closes, and the new Debug Configuration is added to the Instruction Set System Model (ISSM) Debug Interface.

    The new configuration has the name ISSM_n.

Copyright © 2002-2009 ARM Limited. All rights reserved.ARM DUI 0153K
Non-Confidential