3.16.3. Selecting a connection from the active connection list

To select a connection from the active connection list:

  1. Either:

    • Select Connections from the Target menu of the Code window.

    • Click the drop-down arrow on the Cycle Connections button.

    The active connection list is displayed, shown in Figure 3.17.

    Figure 3.17. Active connection list

    Active connection list

    The list shows the active connections in the order in which they are established.

    The current connection is marked with an asterisk, for example:

    *ARM940T_0@RealView-ICE
    

    This is usually the last connection established.

  2. Select the required connection from the list.

Copyright © 2002-2009 ARM Limited. All rights reserved.ARM DUI 0153K
Non-Confidential