4.6.1. Loading the symbols

To load only the symbols for an image:

  1. Select Load Image... from the Target menu to display the Select Local File to Load dialog box. An example is shown Figure 4.1.

  2. Locate the image containing the symbols to be loaded.

  3. Select the Symbols Only check box. The Auto-Set PC and Set PC to Entry point check boxes are deselected.

  4. Click Open. The symbolic references are loaded into the debugger without loading any code or data to the target. You might want to do this if the code and data are already present on the debug target, for example in a ROM device or where you are working with an OS-aware target.

Copyright © 2002-2009 ARM Limited. All rights reserved.ARM DUI 0153K
Non-Confidential