13.11.2. Examining memory in the Memory view

To examine the contents of memory in the Memory view:

  1. Connect to your target.

  2. Load your image, for example, dhrystone.axf.

  3. Select Memory from the View menu to display the Memory view as a floating view. Figure 13.29 shows an example. No memory locations are displayed when you first connect to a target.

    Figure 13.29. Memory view

    Memory view

  4. Enter the required location in the Start address field of the Memory view toolbar. The tab name changes to the specified start address.

    Note

    The Memory view toolbar is displayed by default.

    You can specify the start address as:

    • an address in hexadecimal, for example 0x000088A4

    • a C or C++ expression that RealView Debugger computes to obtain the starting address, for example Int_Glob+64

    • a macro that returns an address, for example thisaddr()

    • any valid expression using constants and symbols.

    You can also use the drop-down arrow to select the start address from values you have entered previously.

    The Memory view is updated. Figure 13.30 shows an example.

    Figure 13.30. Memory view showing address contents

    Memory view showing address contents

See also

Copyright © 2002-2009 ARM Limited. All rights reserved.ARM DUI 0153K
Non-Confidential