Before you can view the topology for your development platform, you must set up the associations for the target processors and other components. To do this:

Example 3.1 shows the associations file entries for the topology shown in Figure 3.15:

Name=ARMCS-DP;Type=ARMCS-DP;
Name=Cortex-R4_1;Type=Cortex-R4;ETM=CSETM_1;
Name=CSETM_1;Type=ETM;TraceOutput0=CSTPIU;TraceOutput1=CSETB;Core=Cortex-R4_1;
Name=CSETB;Type=ETB;Port0=CSETM_1;
Name=CSTPIU;Type=TPIU;Port0=CSETM_1;

Select Connect to Target... from the Target menu to display the Connect to Target window.

Select Show NonCores from the View menu to display the non-processor devices.

Select Configuration from the Grouped By field.

Expand the RealView ICE Debug Interface.

Expand the Debug Configuration for your development platform. An example of a development platform with CoreSight components is shown in Figure 3.15:

Figure 3.15. Targets on a CoreSight development platform

Expand the processor node to show the ETM associated with the processor.

Right-click on the component for which you want to view the topology. For the example shown in Figure 3.15, right-click on CSETM_1.

Select Topology from the context menu. The Topology dialog box is displayed. Figure 3.16 shows an example:

Figure 3.16. Topology dialog box