7.6.2. Synchronizing actions

To synchronize the processors for specific actions:

  1. Select Target → Synchronization Control... from the Code window main menu to open the Synchronization Control window.

  2. Click the Actions tab to display the action controls. Figure 7.3 shows an example:

    Figure 7.3. Synchronization Control window

    Synchronization Control window

  3. Select the Sync check box associated with each processor that you want to include in the processor group.

  4. Deselect the check box associated with each action that you do not want to be synchronized. The actions have the following meanings:

    Load Image

    A specified image is loaded onto all synchronized processors.

    Unload Image

    The image on each synchronized processor is unloaded.

    Reload Image

    The image on each synchronized processor is reloaded.

    Restart

    Reset the program counter to the image entry point for all synchronized processors.

    Reset

    All synchronized processors are reset.

    Set PC

    Set the program counter to a single value on all synchronized processors.

    Load Binary

    A specified binary file is loaded onto all synchronized processors.

Figure 7.4 shows an example Synchronization Control window with a processor group containing the synchronized processors ARM966E-S_0, ARM966E-S_1, and ARM966E-S_2.

Figure 7.4. Synchronization Control window showing synchronized actions

Synchronization Control window showing synchronized actions

See also

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0153N
Non-ConfidentialID052111