3.20. Disconnecting from all targets for a specific Debug Configuration

If all your connections are to targets on a single Debug Configuration, then you can disconnect from all the targets in a single operation.

Note

You must select the Configuration grouping to use this feature.

You can disconnect from all connected targets for a selected Debug Configuration in a single operation. To do this:

  1. Select Target → Connect to Target... from the Code window main menu to open the Connect to Target window. Figure 3.1 shows an example.

  2. Select Configuration from the Grouped by list.

  3. Expand the required Debug Interface to list the associated Debug Configurations.

  4. Right-click on the required Debug Configuration name to display the context menu.

  5. Select Disconnect from the context menu. The targets are disconnected in the order shown in the Debug Configuration.

    Note

    The Disconnect option is enabled only when you select a Debug Configuration that has connected targets.

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0153N
Non-ConfidentialID052111