3.7.5. Connecting to a Model Process target

To connect to a Model Process target:

  1. Start your model running. This can be as standalone executable or within a model simulator.

  2. In RealView Debugger, select Target → Connect to Target... from the Code window main menu to open the Connect to Target window. Figure 3.10 shows an example.

  3. Select Configuration from the Grouped By drop-down list.

  4. Expand the Model Process Debug Interface.

  5. If a connection already exists for the model:

    1. Expand the required Model Process Debug Configuration.

    2. Double-click on the target to connect.

    If a connection does not already exists for the model, you must add a new Debug Configuration.

    Note

    Be aware that the configuration is keyed to the process ID of the simulation for which the configuration is created. The connection fails if you create a new simulation, even if the new simulation appears to be the same as that already configured.

See also

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0153N
Non-ConfidentialID052111