3.2.7. Creating an RTSM Debug Configuration (RTSM not running)

To create an RTSM Debug Configuration when an RTSM is not currently running:

  1. Select Target → Connect to Target... from the Code window main menu to open the Connect to Target window.

  2. Select Configuration from the Grouped By drop-down list.

  3. Click Add for the Real-Time System Model (RTSM) Debug Interface to open the Model Configuration Utility dialog box. Figure 3.7 shows an example:

    Figure 3.7. Model Configuration Utility dialog box (RTSM)

    Model Configuration Utility dialog box (RTSM)

  4. The models provided with RVDS Professional edition are listed in the Models pane. If you want to locate RTSMs you have created with RealView System Generator:

    1. Click Browse... to open the Browse for Folder dialog box.

    2. Locate the directory containing your models.

      Note

      The RTSMs provided with RVDS Professional edition are located in:

      install_directory\RVDS\Models\...\...\lib\...

    3. Click OK. The RTSMs are listed in the Models pane.

  5. Select the required RTSM in the Models pane.

  6. Configure the settings as required for each device in the model in the Parameters of 'device_name' pane.

  7. Click OK to save your changes and close the dialog box. The Model Configuration Utility dialog box closes, and the new Debug Configuration is added to the Real-Time System Model (RTSM) Debug Interface.

    The new configuration has the name RTSM_n.

See also

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0153N
Non-ConfidentialID052111