3.3. Changing the name of a Debug Configuration

When you create a Debug Configuration, RealView Debugger assigns a default name based on the parent Debug Interface. You can change this to a more meaningful name.


You cannot rename a Debug Configuration when the debugger is connected to a target in that Debug Configuration.

To change the name of a Debug Configuration:

  1. Select Target → Connect to Target... from the Code window main menu to open the Connect to Target window.

  2. Select Configuration from the Grouped By drop-down list.

  3. Expand the Debug Interface containing the Debug Configuration to be renamed.

  4. Make sure that there are no targets connected on the Debug Configuration.

  5. Right-click on the required Debug Configuration to display the context menu.

  6. Select Rename Configuration from the context menu.

  7. Enter the new name for the Debug Configuration.

    For example, you might use the name RVI-AP-ARM966E-S_x3 for a Debug Configuration that comprises three ARM966E-S™ processors and an ARM Integrator™/AP development board, that is accessed through DSTREAM or RealView ICE.

See also:

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0153N