3.16.3. Selecting a connection from the active connection list

To select a connection from the active connection list:

  1. Either:

    • Select Target → Connections from the Code window main menu.

    • Click the drop-down arrow on the Cycle Connections button.

    The active connection list is displayed, shown in Figure 3.19.

    Figure 3.19. Active connection list

    Active connection list

    The list shows the active connections in the order in which they are established.

    The current connection is marked with an asterisk, for example:


    This is usually the last connection established.

  2. Select the required connection from the list.

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0153N