3.6. Customizing a Debug Configuration

Use the Connection Properties dialog box to configure the more commonly used settings in a Debug Configuration.

Before you customize a Debug Configuration, do the following:

  1. Select Target → Connect to Target... from the Code window main menu to open the Connect to Target window.

  2. Select Configuration from the Grouped By drop-down list.

  3. Expand the Debug Interface containing the Debug Configuration to be customized.

  4. Make sure that there are no targets connected on the Debug Configuration.

    Note

    You cannot customize a Debug Configuration when the debugger is connected to a target in that Debug Configuration.

See also:

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0153N
Non-ConfidentialID052111