13.12.2. Switching between the Level 1 and Level 2 descriptors

If you have an existing MMU table view, you can switch between the Level 1 and Level 2 descriptors of that MMU. An example MMU table view is shown in Figure 13.33.

To switch between the Level 1 and Level 2 descriptors:

  1. In the Memory view that shows an existing MMU table, right-click on the value of a memory location to display the context menu.

  2. From the Format sub-menu, select the required MMU table view:

    • For ARMv4 and ARMv5 architectures:

      • Pagetables Arch v4/v5 → Level1 Descriptors

      • Pagetables Arch v4/v5 → Level2 Descriptors

    • For ARMv6 and ARMv7 architectures:

      • Pagetables Arch v6/v7 → Level1 Descriptors

      • Pagetables Arch v6/v7 → Level2 Descriptors.

    Note

    The sub-menu does not include an option for the descriptors that are currently being viewed.

Note

Make sure you use the correct options for your MMU architecture.

See also

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0153N
Non-ConfidentialID052111