5.5. Locating the address of a label in the disassembly view

You can locate the address of a label in the disassembly view.

To locate the address of a label:

  1. Connect to your target.

  2. Load an image, for example dhrystone.axf.

  3. Click the Disassembly tab to view the disassembly. The PC is at the entry point at address 0x00008000, marked with a red box and yellow arrow.

  4. Locate the address of the label:

    1. Right-click in the Disassembly tab to display the context menu.

    2. Select Locate Address... from the context menu.

    3. Enter the required address. For example, enter the address 0x8480.

    4. Click Set to open the disassembly view from the specified location. A blue bordered arrow identifies the location.

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0153N