13.13.8. Performing timed updates for RealMonitor and OS-aware targets

If you are using RealMonitor or an OS extension, the memory display can be updated at a specified time interval during program execution.

To perform a timed update of the Memory view:

  1. Connect to a target that is configured to run RealMonitor or that is running an OS-aware application.

  2. Right-click on the contents of a memory location to display the context menu.

  3. Select Timed Update Period... from the context menu to open the Timed Update Period dialog box. Figure 13.38 shows an example:

    Figure 13.38. Timed Update Period dialog box

    Timed Update Period dialog box

  4. Enter the interval, in seconds, between window updates. The default is 15 seconds. This value is used only when Timed Update is enabled.

  5. Click OK to set the interval.

  6. Right-click on the contents of a memory location to display the context menu.

  7. Select Timed Update from the context menu. This option is available when:

    • RealMonitor is activated

    • the target is in Running System Debug (RSD) mode and where supported by the underlying debug target.

See also

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0153N
Non-ConfidentialID052111