13.4.3. Viewing the variables for a module

You can shorten the list of variables in the Variables tab to list only those variables for a specific module in an image. This is especially useful if you have multiple images loaded.

To shorten the list of variables to a specific module in an image:

  1. In the Images tab of the Symbols view, double-click on the image name. The Modules tab is displayed, and lists only the modules for that image, shown in Figure 13.6.

    Figure 13.6. List of modules

    List of modules

    Notice that the Filter field changes to include the image reference. For example, for the Dhrystone image, the filter changes to:

    @dhrystone\*\*
    
  2. Locate the module containing the required function.

  3. Select the Goto Variables check box.

  4. Double-click on the module name. The Variables tab is displayed, and lists only the variables for the chosen module.

    Notice that the Filter field changes to include the image reference. For example, for the module DHRY_1 in the Dhrystone image, the filter changes to:

    @dhrystone\DHRY_1\*
    

    If you want to list the variables for multiple modules that have similar names, such as DHRY_1 and DHRY_2, then change the filter to include wildcards. For example:

    @dhrystone\DHRY*\*
    

    If you want to apply a filter on the complete list of variables, then enter the characters that are common to the required variables. For example, to list all variables that begin with the letter C, then enter C or c (filtering is not case sensitive).

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0153N
Non-ConfidentialID052111