13.9.1. The semihosting controls for DSTREAM or RealView ICE connections

The following semihosting controls for DSTREAM or RealView ICE connections are shown in Figure 13.26:

Semihosting_Enabled

Indicates the semihosting state:

True

Semihosting enabled

False

Semihosting disabled

Top_of_Memory

The address of top of memory.

ARM_SVC

The SVC used for semihosting in ARM state.

Thumb_SVC

The SVC used for semihosting in Thumb state.

Vector

The address of the semihosting vector. The default is 0x8.

Window

Identifies the StdIO tab where any messages and prompts from the image are to be displayed.

Note

You must not change this value.

You can also use the @semihost_symbolname symbols to access these values. To get a list of these symbols, enter the following CLI command:

reginfo,access,match:semihost

Note

It is suggested that you do not modify this in the Registers view. Instead, enable or disable the processor exceptions.

See also

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0153N
Non-ConfidentialID052111