8.3.2. Port numbering

In instances of multicore debugging, each device on the scan chain is allocated a GDB port to connect to the core. Ports are allocated in sequence, starting from port 4000—as shown, for example, in step 4 of About connecting to targets through RealView ICE. Port 4000 is connected to the first device in the scan chain, port 4001 to the second device, and this continues in the same way. Synchronized start/step are not supported.

Copyright © 2002, 2004-2008 ARM Limited. All rights reserved.ARM DUI 0155J
Non-Confidential