4.6. Association Files

Association files are used to describe the associations between devices in a system. Examples of such associations are:

Associations have direction, and some are bi-directional. You must configure associations correctly to allow RealView Debugger to associate trace output with the source of generated trace. Table 4.2 describes a list of components, and states the class of each.

Table 4.2. Component names and class

Component type nameComponent type descriptionComponent class
ARMCS-DPARM CoreSight debug port (supports both JTAG-DP and SW-DP)Debug port
CSETBCoreSight Embedded Trace Buffer (ETB)Trace sink
CSETMCoreSight Embedded Trace Macrocell (ETM)Trace source
CSETM11CoreSight Embedded Trace Macrocell designed for ARM11 (ETM11)Trace source
CSTFUNNELCoreSight Trace FunnelLink
CSTPIUCoreSight Trace Port Interface UnitTrace sink
CSHTM32CoreSight AHB Trace Macrocell (HTM32)Trace source
CSHTM64CoreSight AHB Trace Macrocell (HTM64)Trace source
ARM1136JFS-JTAG-APARM1136JF-S core connected using JTAG-APCore
ARM1156T2FS-JTAG-APARM1156T2FS core connected using JTAG-APCore
ARM1176JZF-JTAG-APARM1156T2FS core connected using JTAG-APCore
Cortex-M1Cortex-M1 coreCore
Cortex-M3Cortex-M3 coreCore
Cortex-R4Cortex-R4 coreCore
Cortex-A8Cortex-A8 coreCore

Copyright © 2002, 2004-2008 ARM Limited. All rights reserved.ARM DUI 0155J
Non-Confidential