D.3.3. Dual-Mictor trace probe characteristics

The spacing between the dual connectors is shown in Figure D.7.

Figure D.7. Dual-Mictor pitch dimensions


The pitch tolerance is 0.1mm.

Note

If connection is to be made to a target that does not fulfil these position requirements, the Dual Mictor Extender Cable Kit (Part Number RT200-CB-00032), comprising two Mictor extender cables, can be used to connect the probe to the target. For more information on the Cable Kit, contact your supplier.

Single-length extender cables have a rating of 400Mbps.

Copyright © 2002, 2004-2008 ARM Limited. All rights reserved.ARM DUI 0155J
Non-Confidential