7.2.2. Identifying your RealView ICE unit

If you want to be certain that you are connecting to the correct run control unit, select an entry in the list, and click Identify:

Note

For TCP/IP connections, devices shown in light gray are those that have responded to browse requests but do not have a valid IP address. You cannot connect to these devices until you have configured the IP address. See Chapter 3 Configuring RealView ICE Networking for information on how to do this.

Alternatively, connect using a USB cable.

Copyright © 2002, 2004-2008 ARM Limited. All rights reserved.ARM DUI 0155J
Non-Confidential