Pin 1

Output 1

Output

This is a user output bit. It operates at a 3.3V swing, with a 100Ω series resistance.

Pin 2

Output 2

Output

This is a user output bit. It operates at a 3.3V swing, with a 100Ω series resistance.

Pin 3

Output 3

Output

This is a user output bit. It operates at a 3.3V swing, with a 100Ω series resistance.

Pin 4

Output 4

Output

This is a user output bit. It operates at a 3.3V swing, with a 100Ω series resistance.

Pin 5

Output 5

Output

This is a user output bit. It operates at a 3.3V swing, with a 100Ω series resistance.

Pin 6

Input 1

Input

This is a user input bit. It has a 10kΩ weak pull-up to the unit internal +3.3V supply, and requires a V_ih(min) of 2.0V and a V_il(max) of 0.8V. It can safely be driven by 5V logic levels, and has Electro Static Discharge (ESD) protection greater than the 2kV human body model.

This pin is not currently supported.

Pin 7

Output 6

Output

This is a copy of the trigger output on the end panel (see Figure 1.1). It operates at a 3.3V swing, with a 100Ω series resistance.

Pin 8

Input 2

Input

This is a copy of the trigger input on the end panel (see Figure 1.1). It has a 10kΩ weak pull-up to the unit internal +3.3V supply, and requires a V_ih(min) of 2.0V and a V_il(max) of 0.8V. It can safely be driven by 5V logic levels, and has ESD protection greater than the 2kV human body model.

This pin is not currently supported.

Pin 9

+3.3V

Output

This is intended for powering external signal conditioning circuitry, to a maximum current of 100mA. Incorrect use of this output might cause the RealView ICE run control unit to enter current limit.

Pin 10

GND

-