Organization

This document is organized into the following chapters:

Chapter 1 Introduction

Read this chapter for an introduction to the ARM Integrator/CP. This chapter identifies the main components and connectors.

Chapter 2 Getting Started

Read this chapter for a description of how to set up and start using the Integrator/CP. This chapter describes how to attach modules to the Integrator/CP and how to apply power.

Chapter 3 System Architecture

Read this chapter for a description of the system architecture. This includes the system buses, memory, and programmable devices.

Chapter 4 Peripherals and Interfaces

Read this chapter for a description of the peripherals supported by the Integrator/CP.

Chapter 5 System Expansion

Read this chapter for a description of the expansion hardware that you can use with your Integrator/CP.

Appendix A Porting Integrator/AP and IM-PD1

Refer to this appendix for instructions on porting existing applications to an Integrator/CP system.

Appendix B Connector Pinouts

Refer to this appendix for a description of the connector signals.

Appendix C Test Points

Refer to this appendix for the location of test points.

Copyright © 2002 ARM Limited. All rights reserved.ARM DUI 0159B
Non-Confidential