| Copyright © 2002. All rights reserved. | ARM DUI 0169A |
| Non-Confidential | |
 PDF version | |
| Home > Unpacking and setting up > About PPFU > Booting the PPFU |
| |||
| Home > Unpacking and setting up > About PPFU > Booting the PPFU |
After power up or reset, the porting platform can boot the standard boot monitor, PPFU, or any other selected image. Boot image selection is controlled by the setting of the DIP switches.
If the boot monitor or another image is booted instead of the PPFU when you power up:
check that the switches on the motherboard a re set with S1[1] to ON and S1[4] to OFF and reset the system.
if the switch settings are correct select PPFU as the boot image as described in Selecting PPFU as the default boot image using the boot monitor.
For information about the DIP switches on the Integrator/AP board, see the Integrator/AP User Guide
| Copyright © 2002. All rights reserved. | ARM DUI 0169A |
| Non-Confidential | |
| PDF version | |
| Home > Unpacking and setting up > About PPFU > Booting the PPFU |