2.3.58. EMURESET

Tests and resets a hardware emulator for targets connected through the DSTREAM or RealView ICE Debug Interface.

Syntax

EMURESET [,test] id

where:

test

Runs an emulation test on the connection identified by id. This can involve JTAG testing or self checks.

id

Connection identity.

Description

The EMURESET command resets a hardware emulator or monitor for targets connected through DSTREAM or RealView ICE. This is not the same as RESET which resets the target processor or board. The emulation reset is used to set the communications up properly or to prepare the board for debugging.

Example

The following example shows how to reset the hardware on the connection with an ID of 4.

emureset 4

Alias

EMURST and HWRESET are aliases of EMURESET.

See also

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0175N
Non-ConfidentialID052111