2.3.32. COREINFO

Displays information about the current target.

Note

This command is supported for ARM architecture-based targets only.

Syntax

COREINFO [type]

where:

type

Specifies the type of information required, which can be one of the following:

ip_vendor

Displays the intellectual property (IP) vendor name.

architecture

Displays the architecture of the target, for example, ARMv5TE.

core_name

Displays the processor name, for example, ARM966E-S.

arm_isa

Displays the ARM ISA version, for example, ARM_ISAv5.

thumb_isa

Displays the Thumb ISA version, for example, THUMB_ISAv2.

vfp

Indicates the supported VFP version if available, for example, VFPv1.

If no type is specified, then the list of available types is displayed.

Description

The COREINFO command displays specific information about the current target.

See also

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0175N
Non-ConfidentialID052111