2.3.53. DTRACE

Displays information on trace.

Syntax

DTRACE [{;windowid | ;fileid}]

where:

windowid | fileid

Identifies the window or file where the command is to send the output.

If you do not supply a windowid or fileid parameter, output is displayed on the screen. If you are using the GUI, then the output is displayed in the Output view.

Description

The DTRACE command displays information about the trace analyzer you are using and the triggers that are defined.

Example

The following example illustrates the output of DTRACE:

> dtrace
ARM Analyzer: ARM Trace Support. Version 2.0.
2 Tracepoints defined.
  Trigger On at Code 0x846C.
  Trigger On at Code 0x8540.
Buffer collected Before Trigger.
(Before/Around/After Supported).

See also

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0175N
Non-ConfidentialID052111