5.14.2. Closing down with a connection

If you are connected to your target and you select File ? Exit, the Exit dialog box includes the Disconnect Connection check box, shown in Figure 5.12.

Figure 5.12. Exit dialog box, connected

Exit dialog box, connected

Use the check box to specify your disconnect options:

Maintaining the connection

To close down and maintain the connection:

  1. Unselect the Disconnect Connection check box shown in Figure 5.12.

  2. Click Yes to close the Exit dialog box and close down RealView Debugger.

RealView Debugger exits but the connection is maintained for future sessions, that is the Target Vehicle Server (TVS) is left running. If you are connected to a remote debug target and you close down this way, the remote RealView Connection Broker, that is RealView Network Broker, is also left running.

Terminating the connection

To close down and terminate the connection:

  1. Leave the Disconnect Connection check box, shown in Figure 5.12, so that it is selected.

  2. Click Yes to close the Exit dialog box and close down RealView Debugger.

RealView Debugger exits and terminates any connections to debug targets, that is TVS stops. If you are connected to a remote debug target and you close down this way, you must stop the remote RealView Connection Broker, that is RealView Network Broker, manually.

Note

See Components of RealView Debugger for details of TVS and RealView Connection Broker.

Copyright © 2002-2005 ARM Limited. All rights reserved.ARM DUI 0181G
Non-Confidential