3.12.3. Configuring the internationalization settings

You can set the internationalization settings using:

You can use the following procedure to edit the internationalization settings for both global and workspace settings:

  1. Expand the following groups in the left pane:

    • ...\rvdebug.ini

    • ALL

    • Text

  2. Select the Internationalization group in the left pane.

  3. Change the settings to the required values:

    1. Right-click on the Enabled setting, and select True from the context menu

    2. Right-click on the Language setting, and select the required language from the context menu, English, Japanese, or Chinese.

    3. Right-click on the Default_encoding setting, and select the required encoding from the context menu, either ASCII, UTF-8, or Locale.

  4. Select the Font_information group in the left pane.

  5. Change the settings to the required values:

    1. Right-click on the Pane_font setting, and select Edit as font... from the context menu. The Font dialog box is displayed.

    2. In the Font dialog box, change the font to that required for your language.

    3. Set up the remaining font settings as required. For Chinese and Japanese languages, see Font recommendations.

    4. Click OK to close the Font dialog box.

  6. Select File ? Save and Close to save your changes and close the settings window.

  7. Select File ? Exit to exit RealView Debugger.

  8. Start RealView Debugger again as described in Starting RealView Debugger.

    In the Code window, an Encoding toolbar is now displayed, shown in Figure 3.3.

    Figure 3.3. Encoding toolbar

    Encoding toolbar
Copyright © 2002-2006 ARM Limited. All rights reserved.ARM DUI 0181H
Non-Confidential