3.12.3. Configuring the internationalization settings

You can set the internationalization settings using:

You can use the following procedure to edit the internationalization settings for both global and workspace settings:

  1. Expand the following groups in the left pane:

    • ...\rvdebug.ini

    • ALL

    • Text

  2. Select the Internationalization group in the left pane.

  3. Change the settings to the required values:

    1. Right-click on the Enabled setting, and select True from the context menu

    2. Right-click on the Language setting, and select the required language from the context menu, English or Japanese.

    3. Right-click on the Default_encoding setting, and select the required encoding from the context menu, either ASCII, UTF-8, or Locale.

  4. Select the Font_information group in the left pane.

  5. Change the settings to the required values:

    1. Right-click on the Pane_font setting, and select Edit as font... from the context menu. The Font dialog box is displayed.

    2. In the Font dialog box, change the font to that required for your language.

    3. Set up the remaining font settings as required. For the Japanese language, select either MSGothic or MSMincho.

    4. Click OK to close the Font dialog box.

  6. Select Save and Close from the File menu to save your changes and close the settings window.

  7. Select Exit from the File menu to exit RealView Debugger.

  8. Start RealView Debugger again.

    In the Code window, an Encoding field is now displayed in the Find toolbar, shown in Figure 3.9.

    Figure 3.9. Find toolbar with Encoding field

    Find toolbar with Encoding field

See also

Copyright © 2002-2007 ARM Limited. All rights reserved.ARM DUI 0181I
Non-Confidential