3.4.2. Elements of the Connect to Target window

The Connect to Target window includes a tree control, which comprises:

Debug Interface

This group shows the type of debug target interface used to support the connection. For RealView ICE, this is the ARM® JTAG debug tool for embedded systems.

Debug Configuration

A Debug Configuration identifies the targets that are available on the associated development platform. A Debug Configuration enables you to set up a custom debugging environment.

Target grouping

You can display the targets using the following groupings:

Target

All the targets are shown as a single list in each Debug Interface. The targets are listed in the order of the associated Configuration name, shown in Figure 3.3.

Figure 3.3. Example Connect to Target window (Target group)

Example Connect to Target window (Target group)
Configuration

The targets are listed under the name of the associated Debug Configuration, shown in Figure 3.4. You can have multiple Debug Configurations for the same development platform. If you have multiple debugging platforms, then you must create a separate Debug Configuration for each platform. A Debug Configuration enables you to set up a custom debugging environment.

Figure 3.4. Example Connect to Target window (Configuration group)

Example Connect to Target window (Configuration group)

Note

A Synchronization Control window is also available for debugging multiprocessor applications.

See also

Copyright © 2002-2007 ARM Limited. All rights reserved.ARM DUI 0181I
Non-Confidential