4.4. Programming Flash on the ARM boards

RealView Debugger provides Flash programming files for the following ARM boards:

All files required to program Flash on the ARM boards are provided with RealView Debugger (see Summary of files used to program Flash for the supported platforms).

Note

If you have another target board with a standard AMD, ATMEL, Intel, or SST Flash device you must create a board-specific assembler file and link that file to create an FME file before you can program the Flash memory. If you are using another type of Flash memory, you must also create the Flash programming routines. See Programming Flash for a custom development platform for more details.

This section describes how to program Flash on the ARM boards, using the Integrator/AP board as an example. It includes:

Copyright © 2002-2005 ARM Limited. All rights reserved.ARM DUI 0182G
Non-Confidential