| |||
| Home > Configuring Custom Memory Maps, Registers and Peripherals > Troubleshooting BCD files > Expected memory map is not displayed | |||
Check the following:
If you have
assigned a board/chip definition to a Debug Configuration, and you do
not see the expected memory map in the Memory Map tab
of the Process Control view, then make sure you have assigned the
correct board/chip definition to the Debug Configuration. You can
assign more than one board/chip definition to a Debug Configuration
if required. The settings in a board/chip definition are used only
if the Advanced_Information block group name
matches the target to which you are connecting.
If you have assigned the correct board/chip definition
to a Debug Configuration, check the names of the Advanced_Information block
groups in the board/chip definition. Groups with names Default or All are
used for all target connections in a Debug Configuration.
An Advanced_Information block group name
must reflect the target to which you are connecting. For example,
a group named ARM is used when you connect to
any ARM architecture-based target.