RealView Debugger Target Configuration GuideVersion 4.1
Home > Debug Configuration Tutorial > Creating a new Debug Configuration

5.3. Creating a new Debug Configuration

Create a new Debug Configuration when you do not want to change the default Debug Configurations.

To create a new Debug Configuration:

  1. Select Connect to Target... from the Target menu to display the Connect to Target window.

  2. Locate the required Debug Configuration:

    1. Select Configuration from the Grouped By list.

    2. Expand the RealView Instruction Set Simulator (RVISS) Debug Interface.

  3. Click Add for the RealView Instruction Set Simulator (RVISS) Debug Interface. The ARMulator Configuration dialog box is displayed.

    Note

    If you are using a different Debug Interface, then a configuration dialog box appropriate to that interface is displayed.

  4. Select ARM926EJ-S for the processor.

  5. Click OK. The ARMulator Configuration dialog box closes, and a new Debug Configuration is added, called RVISS_3 as shown in Figure 5.3.

    Figure 5.3. RVISS_3 Debug Configuration in the Connect to Target window

    RVISS_3 Debug Configuration in the Connect to Target window

  6. Right-click on the new Debug Configuration (RVISS_3) to display the context menu.

  7. Select Rename Configuration from the context menu.

  8. Change the name of the Debug Configuration to EthernetRouter.

See also:

Copyright © 2002-2010 ARM Limited. All rights reserved.ARM DUI 0182M
Non-ConfidentialID102410
PDF file icon  PDF version
Home > Debug Configuration Tutorial > Creating a new Debug Configuration