RealView Debugger Target Configuration Guide: 3.8.2. Setting vector catch for all targets

To set the state of individual vectors for all targets in a Debug Configuration:

Select Target → Connect to Target... from the Code window main menu to open the Connect to Target window.
Locate the required Debug Configuration:
1. Select Configuration from the Grouped By list.
2. Expand the Debug Interface containing the Debug Configuration of interest. For this example, expand RealView ICE.
3. Make sure that all targets are disconnected on the Debug Configuration.
Right-click on the required Debug Configuration to display the context menu. For example, right-click on RealView-ICE.
Select Properties... from the context menu to open the Connection Properties dialog box.
Click the Advanced button to open the Connection Properties window.
The settings group for the Debug Configuration entry is selected, and the contents are displayed in the right pane.
To set the state of the vectors:
1. Expand the following entries:
  - CONNECTION=name (name is RealView-ICE in this example)
  - Advanced_Information
  - Default
  - ARM_config
2. Select Vectors in the left pane.
3. Set each vector in the right pane to the required state (see Table 3.2).
Select File → Save and Close from the menu to save your changes and close the Connection Properties window.
Click the OK button to close the Connection Properties dialog box.

When you connect to a target in your Debug Configuration, the state of each vector is applied to that target.

Copyright © 2002-2011 ARM. All rights reserved.	ARM DUI 0182N
Non-Confidential	ID052111
PDF version