3.3.3. Changing the order of settings that have multiple values

Some settings, such as Pre_connect, enable you to enter multiple values. Each value you enter creates a new instance below the main setting that is colored blue. The last value you enter is listed first. For some settings, such as BoardChip_Name, this order is not important. However, for settings such as the Pre_connect setting the order is important. Therefore, if you discover that you have entered the values in the wrong order you might want to re-order the list.

To re-order the list of values for a setting that has multiple values:

  1. Right-click on the required Debug Configuration to display the context menu. For example, right-click on RVISS.

  2. Select Properties... from the context menu to open the Connection Properties dialog box.

  3. Click the Advanced button to open the Connection Properties window.

    The settings group for the Debug Configuration entry is selected, and the contents are displayed in the right pane.

  4. Locate the multiple-value setting that you want to reorder, such as the Pre_connect setting.

  5. Right-click on any instance of the setting to display the context menu.

    For example, right-click on an instance of the Pre_connect setting.

  6. Select Manage List... from the context menu to open the Settings: List Manager dialog box.

  7. Select the check box for a group or setting that you want to move.

  8. Click either Move Up or Move Down to move the selected group or setting to the required position.

  9. Click OK to close the Settings: List Manager dialog box.

    The list is reordered (the Pre_connect list in this example).

  10. Select Save and Close from the File menu to save your changes and close the Connection Properties window.

  11. Click OK to close the Connection Properties dialog box.

See also

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0182N
Non-ConfidentialID052111