A.3.4. Cross_trigger

These settings control the cross-triggering of a stop command between multiple processors that are closely coupled in hardware. They specify whether stopping execution of one processor stops execution of other processors, either because of a break or another stop condition:

Cross_trigger group settings

The following settings are available in the Cross_trigger group:

Trig_in_ena

List of commands to enable input triggering.

Trig_in_dis

List of commands to disable input triggering.

Trig_out_ena

List of commands to enable output triggering.

Trig_out_dis

List of commands to disable output triggering.

See also

Copyright © 2002-2011 ARM. All rights reserved.ARM DUI 0182N
Non-ConfidentialID052111