C.6.4. UARTs

The serial interface is implemented with two PrimeCell UARTs instantiated into the IM-LT3 FPGA. Transceivers and connectors for the serial interfaces are provided on the Integrator/CP baseboard and signals between the IM-LT3 and baseboard are routed through the HDRB connectors.

The UARTs are functionally similar to standard 16C550 devices.

For detailed information about the UART, see the UART (PL011) Technical Reference Manual.

Copyright © 2005, 2006 ARM Limited. All rights reserved.ARM DUI 0216B
Non-Confidential