2.3.1. Connecting Trace

Trace connection is to the Mictor trace connectors on the Core Tile or Core Module.

Depending on stacking arrangement, a right-angle adapter cable might be required to access the trace connectors (see the BLUE RIBBON coax assemblies on the Precision Interconnect website at www.precisionint.com).

Figure 2.9. Trace connection

Note

If an SMM core is implemented in an attached Logic Tile FPGAs, Mictor connector J11 can be configured as a basic trace port (see Debug connectors).

Copyright © 2005, 2006 ARM Limited. All rights reserved.ARM DUI 0216B
Non-Confidential