2.1.6. Supplying power to the IM-LT3

When using the IM-LT3 as a standalone development system, you must connect a bench power supply with 3.3V and 5V outputs to the screw-terminal power connector as illustrated in Figure 2.5.

Figure 2.5. Power connector on IM-LT3


Do not use the power connection if the IM-LT3 is fitted to an Integrator/CP baseboard (see Power supplies).

Both the 3.3V and 5V supplies must be turned on and off at the same time.

Voltage supply tolerance for both supplies must be within plus or minus 5%.

Copyright © 2005, 2006 ARM Limited. All rights reserved.ARM DUI 0216B