3.10.1. Debug connectors

The IM-LT3 incorporates two Mictor connectors for a logic analyzer or Trace Port analyzer. These enable you to carry out real-time tests by connecting external test equipment to the IM-LT3. The Mictor connector pinout is described in Mictor logic analyzer connectors.

Note

If you are connecting a Trace Port Analyzer to a Core Tile or Core Module, use the trace connectors on the Core Tile or Core Module. (See Connecting Trace.)

If an SMM is implemented in an attached Logic Tile, a basic trace port can be implemented with the Mictor connector J11 as shown in Figure 3.26.

Figure 3.26. Trace and Logic analyzer connection block diagram

Copyright © 2005, 2006 ARM Limited. All rights reserved.ARM DUI 0216B
Non-Confidential