9.2.2. Scoping to a module or file

To scope to a module:

  1. Click on the Src tab to view the source file dhry_1.c.

  2. Select Find → Module/File List... to display the Module/File List dialog box shown in Figure 9.1.

  3. Select a module from the list.

  4. Click Scope to scope to that module.

The Src tab is updated to show that the scope is forced, as illustrated in Figure 9.2.

Figure 9.2. Forcing scope

Forcing scope

The location in the source file is identified by:

If the file is not already open in the File Editor pane, RealView Debugger opens it automatically, the window scrolls to the right place, and the scope is adjusted. The Module/File List dialog box closes.

Copyright © 2003, 2004 ARM Limited. All rights reserved.ARM DUI 0234B