12.7.4. Disabling a group

To disable a group in the Project Properties window:

  1. Right-click on the group to be disabled, for example *COMPILE=arm, and select Explore from the context menu.

  2. Right-click on the Disable setting in the Settings Values pane and select True from the options list.

  3. Select File → Save and Close to regenerate the makefile(s) for the project, and close the Project Properties window.

  4. Select Tools → Build... to rebuild the application.

If you disable a group, the entry in the left pane is grayed out but it does not appear as an entry in the right pane of the Project Properties window, shown in Figure 12.7. You can view and change entries in a disabled group in the usual way, see Configuring project properties for details.

To enable the group again:

  1. Right-click on the disabled group, for example *COMPILE=arm, and select Explore from the context menu.

  2. Right-click on the Disable setting in the Settings Values pane and select False from the options list.

  3. Select File → Save and Close to regenerate the makefile(s) for the project, and close the Project Properties window.

  4. Select Tools → Build... to rebuild the application.

Copyright © 2003, 2004 ARM Limited. All rights reserved.ARM DUI 0234B
Non-Confidential